Abstract: This study aims to develop the alkali activated slag-fly ash concrete (AASFC) using precious slag (PS) ball as the fine aggregate. The slag-fly ash proportion, sodium silicate/sodium hydroxide (SS/SH) ratio and sodium hydroxide concentration are the prime variables. The fresh concrete properties like workability, setting time and the hardened concrete properties of AASFC developed under ambient curing were analyzed and similar way by replacing with fly ash (FA). The sodium hydroxide concentration of 8 M, 10 M and 12 M, SS/SH ratio of 1.0, 1.5 and 2.0, alkaline liquid to binder ratio of 0.35 and variation in slag-fly ash proportion as major inputs for mix design. The test results showed that, the fresh state of AASFC blend has a shorter setting time of 12–16 min, because of calcium mineral from the FA, the workability and setting time of AASFC mix was enhanced by the addition of the tri-sodium phosphate as a retarder. At the higher SS/SH extent, the workability and setting time exaggerated, whereas the increased FA content and sodium hydroxide concentration had a greater influence on the fresh state of concrete. Also, the sodium hydroxide concentration, SS/SH ratio and slag-fly ash proportion are the most inducing parameters on the workability, setting time and strength parameters of AASFC.